Charts: TT105

       Name: TT105                                                   [Show more]
       Type: Subroutine
   Category: Charts
    Summary: Draw crosshairs on the Short-range Chart, with clipping
    Context: See this subroutine in context in the source code
 References: This subroutine is called as follows:
             * TT103 calls TT105


 Check whether the crosshairs are close enough to the current system to appear
 on the Short-range Chart, and if so, draw them.


.TT105

 LDA QQ9                ; Set A = QQ9 - QQ0, the horizontal distance between the
 SEC                    ; crosshairs (QQ9) and the current system (QQ0)
 SBC QQ0

 CMP #36                ; If the horizontal distance in A < 36, then the
 BCC TT179              ; crosshairs are close enough to the current system to
                        ; appear in the Short-range Chart, so jump to TT179 to
                        ; check the vertical distance

 CMP #233               ; If the horizontal distance in A < -23, then the
 BCC HideCrosshairs     ; crosshairs are too far from the current system to
                        ; appear in the Short-range Chart, so jump to
                        ; HideCrosshairs to hide the crosshairs and return from
                        ; the subroutine using a tail call

.TT179

 ASL A                  ; Set QQ19 = 104 + A * 4
 ASL A                  ;
 CLC                    ; 104 is the x-coordinate of the centre of the chart,
 ADC #104               ; so this sets QQ19 to the screen pixel x-coordinate
 STA QQ19               ; of the crosshairs

 LDA QQ10               ; Set A = QQ10 - QQ1, the vertical distance between the
 SEC                    ; crosshairs (QQ10) and the current system (QQ1)
 SBC QQ1

 CMP #38                ; If the vertical distance in A is < 38, then the
 BCC P%+6               ; crosshairs are close enough to the current system to
                        ; appear in the Short-range Chart, so skip the next two
                        ; instructions

 CMP #220               ; If the horizontal distance in A is < -36, then the
 BCC HideCrosshairs     ; crosshairs are too far from the current system to
                        ; appear in the Short-range Chart, so jump to
                        ; HideCrosshairs to hide the crosshairs and return from
                        ; the subroutine using a tail call

 ASL A                  ; Set QQ19+1 = 90 + A * 2
 CLC                    ;
 ADC #90                ; 90 is the y-coordinate of the centre of the chart,
 STA QQ19+1             ; so this sets QQ19+1 to the screen pixel x-coordinate
                        ; of the crosshairs

 LDA #8                 ; Set QQ19+2 to 8 denote crosshairs of size 8
 STA QQ19+2

                        ; Fall through into DrawCrosshairs to draw crosshairs of
                        ; size 8 at the crosshairs coordinates