.MA22 LDA MJ \ If we are in witchspace, jump down to MA23S to skip BNE MA23S \ the following, as there are no planets or suns to \ bump into in witchspace LDA MCNT \ Fetch the main loop counter and calculate MCNT mod 32, AND #31 \ which tells us the position of this loop in each block \ of 32 iterations .MA93 CMP #10 \ If this is the tenth iteration in this block of 32, BNE MA29 \ do the following, otherwise jump to MA29 to skip the \ planet altitude check and move on to the sun distance \ check LDA #50 \ If our energy bank status in ENERGY is >= 50, skip CMP ENERGY \ printing the following message (so the message is BCC P%+6 \ only shown if our energy is low) ASL A \ Print recursive token 100 ("ENERGY LOW{beep}") as an JSR MESS \ in-flight message LDY #&FF \ Set our altitude in ALTIT to &FF, the maximum STY ALTIT INY \ Set Y = 0 JSR m \ Call m to calculate the maximum distance to the \ planet in any of the three axes, returned in A BNE MA23 \ If A > 0 then we are a fair distance away from the \ planet in at least one axis, so jump to MA23 to skip \ the rest of the altitude check JSR MAS3 \ Set A = x_hi^2 + y_hi^2 + z_hi^2, so using Pythagoras \ we now know that A now contains the square of the \ distance between our ship (at the origin) and the \ centre of the planet at (x_hi, y_hi, z_hi) BCS MA23 \ If the C flag was set by MAS3, then the result \ overflowed (was greater than &FF) and we are still a \ fair distance from the planet, so jump to MA23 as we \ haven't crashed into the planet SBC #36 \ Subtract 36 from x_hi^2 + y_hi^2 + z_hi^2. The radius \ of the planet is defined as 6 units and 6^2 = 36, so \ A now contains the high byte of our altitude above \ the planet surface, squared BCC MA28 \ If A < 0 then jump to MA28 as we have crashed into \ the planet STA R \ We are getting close to the planet, so we need to JSR LL5 \ work out how close. We know from the above that A \ contains our altitude squared, so we store A in R \ and call LL5 to calculate: \ \ Q = SQRT(R Q) = SQRT(A Q) \ \ Interestingly, Q doesn't appear to be set to 0 for \ this calculation, so presumably this doesn't make a \ difference LDA Q \ Store the result in ALTIT, our altitude STA ALTIT BNE MA23 \ If our altitude is non-zero then we haven't crashed, \ so jump to MA23 to skip to the next section .MA28 JMP DEATH \ If we get here then we just crashed into the planet \ or got too close to the sun, so jump to DEATH to start \ the funeral preparations and return from the main \ flight loop using a tail call .MA29 CMP #15 \ If this is the 15th iteration in this block of 32, BNE MA33 \ do the following, otherwise jump to MA33 to skip the \ docking computer manoeuvring LDA auto \ If auto is zero, then the docking computer is not BEQ MA23 \ activated, so jump to MA33 to skip the \ docking computer manoeuvring LDA #123 \ Set A = 123 and jump down to MA34 to print token 123 BNE MA34 \ ("DOCKING COMPUTERS ON") as an in-flight message .MA33 CMP #20 \ If this is the 20th iteration in this block of 32, BNE MA23 \ do the following, otherwise jump to MA23 to skip the \ sun altitude check LDA #30 \ Set CABTMP to 30, the cabin temperature in deep space STA CABTMP \ (i.e. one notch on the dashboard bar) LDA SSPR \ If we are inside the space station safe zone, jump to BNE MA23 \ MA23 to skip the following, as we can't have both the \ sun and space station at the same time, so we clearly \ can't be flying near the sun LDY #NI% \ Set Y to NI%, which is the offset in K% for the sun's \ data block, as the second block at K% is reserved for \ the sun (or space station) JSR MAS2 \ Call MAS2 to calculate the largest distance to the BNE MA23 \ sun in any of the three axes, and if it's non-zero, \ jump to MA23 to skip the following, as we are too far \ from the sun for scooping or temperature changes JSR MAS3 \ Set A = x_hi^2 + y_hi^2 + z_hi^2, so using Pythagoras \ we now know that A now contains the square of the \ distance between our ship (at the origin) and the \ heart of the sun at (x_hi, y_hi, z_hi) EOR #%11111111 \ Invert A, so A is now small if we are far from the \ sun and large if we are close to the sun, in the \ range 0 = far away to &FF = extremely close, ouch, \ hot, hot, hot! ADC #30 \ Add the minimum cabin temperature of 30, so we get \ one of the following: \ \ * If the C flag is clear, A contains the cabin \ temperature, ranging from 30 to 255, that's hotter \ the closer we are to the sun \ \ * If the C flag is set, the addition has rolled over \ and the cabin temperature is over 255 STA CABTMP \ Store the updated cabin temperature BCS MA28 \ If the C flag is set then jump to MA28 to die, as \ our temperature is off the scale CMP #&E0 \ If the cabin temperature < 224 then jump to MA23 to BCC MA23 \ to skip fuel scooping, as we aren't close enough LDA BST \ If we don't have fuel scoops fitted, jump to BA23 to BEQ MA23 \ skip fuel scooping, as we can't scoop without fuel \ scoops LDA DELT4+1 \ We are now successfully fuel scooping, so it's time LSR A \ to work out how much fuel we're scooping. Fetch the \ high byte of DELT4, which contains our current speed \ divided by 4, and halve it to get our current speed \ divided by 8 (so it's now a value between 1 and 5, as \ our speed is normally between 1 and 40). This gives \ us the amount of fuel that's being scooped in A, so \ the faster we go, the more fuel we scoop, and because \ the fuel levels are stored as 10 * the fuel in light \ years, that means we just scooped between 0.1 and 0.5 \ light years of free fuel ADC QQ14 \ Set A = A + the current fuel level * 10 (from QQ14) CMP #70 \ If A > 70 then set A = 70 (as 70 is the maximum fuel BCC P%+4 \ level, or 7.0 light years) LDA #70 STA QQ14 \ Store the updated fuel level in QQ14 LDA #160 \ Set A to token 160 ("FUEL SCOOPS ON") .MA34 JSR MESS \ Print the token in A as an in-flight messageName: Main flight loop (Part 15 of 16) [Show more] Type: Subroutine Category: Main loop Summary: Perform altitude checks with the planet and sun and process fuel scooping if appropriate Deep dive: Program flow of the main game loop Scheduling tasks with the main loop counterContext: See this subroutine in context in the source code Variations: See code variations for this subroutine in the different versions References: No direct references to this subroutine in this source file

The main flight loop covers most of the flight-specific aspects of Elite. This section covers the following: * Perform an altitude check with the planet (every 32 iterations of the main loop, on iteration 10 of each 32) * Perform an an altitude check with the sun and process fuel scooping (every 32 iterations of the main loop, on iteration 20 of each 32)

[X]

Subroutine DEATH (category: Start and end)

Display the death screen

[X]

Subroutine LL5 (category: Maths (Arithmetic))

Calculate Q = SQRT(R Q)

[X]

Label MA23 in subroutine Main flight loop (Part 16 of 16)

[X]

Label MA23S in subroutine Main flight loop (Part 14 of 16)

[X]

Label MA28 is local to this routine

[X]

Label MA29 is local to this routine

[X]

Label MA33 is local to this routine

[X]

Label MA34 is local to this routine

[X]

Subroutine MAS2 (category: Maths (Geometry))

Calculate a cap on the maximum distance to the planet or sun

[X]

Subroutine MAS3 (category: Maths (Arithmetic))

Calculate A = x_hi^2 + y_hi^2 + z_hi^2 in the K% block

[X]

Subroutine MESS (category: Text)

Display an in-flight message

[X]

Configuration variable: NI% = 37

The number of bytes in each ship's data block (as stored in INWK and K%)

[X]

Entry point m in subroutine MAS2 (category: Maths (Geometry))

Do not include A in the calculation