INCLUDE "1-source-files/main-sources/elite-build-options.asm" _RELEASED = (_VARIANT = 1) _SOURCE_DISC = (_VARIANT = 2) _BUG_FIX = (_VARIANT = 3) GUARD &6000 \ Guard against assembling over screen memoryELITE-A SHIP BLUEPRINTS FILE V Elite-A is an extended version of BBC Micro Elite by Angus Duggan The original Elite was written by Ian Bell and David Braben and is copyright Acornsoft 1984, and the extra code in Elite-A is copyright Angus Duggan The code on this site is identical to Angus Duggan's source discs (it's just been reformatted, and the label names have been changed to be consistent with the sources for the original BBC Micro disc version on which it is based) The commentary is copyright Mark Moxon, and any misunderstandings or mistakes in the documentation are entirely my fault The terminology and notations used in this commentary are explained at https://www.bbcelite.com/terminology The deep dive articles referred to in this commentary can be found at https://www.bbcelite.com/deep_dives
This source file produces the following binary file: * S.V.binCODE% = &5600 \ The flight code runs this file at address &5600, at \ label XX21 LOAD% = &5600 \ The flight code loads this file at address &5600, at \ label XX21 SHIP_MISSILE = &7F00 \ The address of the missile ship blueprint \ \ [Show more]Configuration variables\ \ This variable is used by the following: \ \ * XX21 \ \ This list only includes code that refers to the \ variable by name; there may be other references to \ this memory location that don't use this label, and \ these will not be mentioned aboveORG CODE%.XX21 EQUW SHIP_MISSILE \ MSL = 1 = Missile Missile EQUW SHIP_DODO \ 2 = Dodo space station Station EQUW SHIP_ESCAPE_POD \ ESC = 3 = Escape pod Escape pod EQUW SHIP_PLATE \ PLT = 4 = Alloy plate Cargo EQUW SHIP_CANISTER \ OIL = 5 = Cargo canister Cargo EQUW SHIP_BOULDER \ 6 = Boulder Mining EQUW 0 \ Mining EQUW 0 \ Mining EQUW 0 \ Shuttle EQUW 0 \ Transporter EQUW SHIP_COBRA_MK_3 \ 11 = Cobra Mk III Trader EQUW SHIP_BOA \ 12 = Boa Trader EQUW SHIP_COBRA_MK_1 \ 13 = Cobra Mk I Trader EQUW 0 \ Large ship EQUW 0 \ Small ship EQUW SHIP_VIPER \ COPS = 16 = Viper Cop EQUW SHIP_COBRA_MK_1 \ 17 = Cobra Mk I Pirate EQUW SHIP_SIDEWINDER \ 18 = Sidewinder Pirate EQUW SHIP_ADDER \ 19 = Adder Pirate EQUW 0 \ Pirate EQUW SHIP_COBRA_MK_3 \ 21 = Cobra Mk III Pirate EQUW 0 \ Pirate EQUW 0 \ Pirate EQUW 0 \ Pirate EQUW SHIP_COBRA_MK_3 \ 25 = Cobra Mk III Bounty hunter EQUW 0 \ Bounty hunter EQUW SHIP_COBRA_MK_1 \ 27 = Cobra Mk I Bounty hunter EQUW SHIP_SIDEWINDER \ 28 = Sidewinder Bounty hunter EQUW 0 \ Thargoid EQUW 0 \ Thargoid EQUW 0 \ ConstrictorName: XX21 [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprints lookup table for the S.V file Deep dive: Ship blueprints in Elite-AContext: See this variable on its own page References: No direct references to this variable in this source file.E% EQUB %00000000 \ Missile EQUB %01000000 \ Dodo space station Cop EQUB %01000001 \ Escape pod Trader, cop EQUB %00000000 \ Alloy plate EQUB %00000000 \ Cargo canister EQUB %00000000 \ Boulder EQUB 0 EQUB 0 EQUB 0 EQUB 0 EQUB %10100000 \ Cobra Mk III Innocent, escape pod EQUB %10100001 \ Boa Trader, innocent, escape pod EQUB %10100000 \ Cobra Mk I Innocent, escape pod EQUB 0 EQUB 0 EQUB %11000010 \ Viper Bounty hunter, cop, escape pod EQUB %10001100 \ Cobra Mk I Hostile, pirate, escape pod EQUB %00001100 \ Sidewinder Hostile, pirate EQUB %10000100 \ Adder Hostile, escape pod EQUB 0 EQUB %10000100 \ Cobra Mk III Hostile, escape pod EQUB 0 EQUB 0 EQUB 0 EQUB %10000010 \ Cobra Mk III Bounty hunter, escape pod EQUB 0 EQUB %10000010 \ Cobra Mk I Bounty hunter, escape pod EQUB %00100010 \ Sidewinder Bounty hunter, innocent EQUB 0 EQUB 0 EQUB 0Name: E% [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprints default NEWB flags for the S.V file Deep dive: Ship blueprints in Elite-A Advanced tactics with the NEWB flagsContext: See this variable on its own page References: No direct references to this variable in this source fileMACRO VERTEX x, y, z, face1, face2, face3, face4, visibility IF x < 0 s_x = 1 << 7 ELSE s_x = 0 ENDIF IF y < 0 s_y = 1 << 6 ELSE s_y = 0 ENDIF IF z < 0 s_z = 1 << 5 ELSE s_z = 0 ENDIF s = s_x + s_y + s_z + visibility f1 = face1 + (face2 << 4) f2 = face3 + (face4 << 4) ax = ABS(x) ay = ABS(y) az = ABS(z) EQUB ax, ay, az, s, f1, f2 ENDMACROName: VERTEX [Show more] Type: Macro Category: Drawing ships Summary: Macro definition for adding vertices to ship blueprints Deep dive: Ship blueprintsContext: See this macro on its own page References: This macro is used as follows: * SHIP_ADDER uses VERTEX * SHIP_BOA uses VERTEX * SHIP_BOULDER uses VERTEX * SHIP_CANISTER uses VERTEX * SHIP_COBRA_MK_1 uses VERTEX * SHIP_COBRA_MK_3 uses VERTEX * SHIP_DODO uses VERTEX * SHIP_ESCAPE_POD uses VERTEX * SHIP_PLATE uses VERTEX * SHIP_SIDEWINDER uses VERTEX * SHIP_VIPER uses VERTEX
The following macro is used to build the ship blueprints: VERTEX x, y, z, face1, face2, face3, face4, visibility See the deep dive on "Ship blueprints" for details of how vertices are stored in the ship blueprints, and the deep dive on "Drawing ships" for information on how vertices are used to draw 3D wireframe ships.
Arguments: x The vertex's x-coordinate y The vertex's y-coordinate z The vertex's z-coordinate face1 The number of face 1 associated with this vertex face2 The number of face 2 associated with this vertex face3 The number of face 3 associated with this vertex face4 The number of face 4 associated with this vertex visibility The visibility distance, beyond which the vertex is not shownMACRO EDGE vertex1, vertex2, face1, face2, visibility f = face1 + (face2 << 4) EQUB visibility, f, vertex1 << 2, vertex2 << 2 ENDMACROName: EDGE [Show more] Type: Macro Category: Drawing ships Summary: Macro definition for adding edges to ship blueprints Deep dive: Ship blueprintsContext: See this macro on its own page References: This macro is used as follows: * SHIP_ADDER uses EDGE * SHIP_BOA uses EDGE * SHIP_BOULDER uses EDGE * SHIP_CANISTER uses EDGE * SHIP_COBRA_MK_1 uses EDGE * SHIP_COBRA_MK_3 uses EDGE * SHIP_DODO uses EDGE * SHIP_ESCAPE_POD uses EDGE * SHIP_PLATE uses EDGE * SHIP_SIDEWINDER uses EDGE * SHIP_VIPER uses EDGE
The following macro is used to build the ship blueprints: EDGE vertex1, vertex2, face1, face2, visibility See the deep dive on "Ship blueprints" for details of how edges are stored in the ship blueprints, and the deep dive on "Drawing ships" for information on how edges are used to draw 3D wireframe ships.
Arguments: vertex1 The number of the vertex at the start of the edge vertex1 The number of the vertex at the end of the edge face1 The number of face 1 associated with this edge face2 The number of face 2 associated with this edge visibility The visibility distance, beyond which the edge is not shownMACRO FACE normal_x, normal_y, normal_z, visibility IF normal_x < 0 s_x = 1 << 7 ELSE s_x = 0 ENDIF IF normal_y < 0 s_y = 1 << 6 ELSE s_y = 0 ENDIF IF normal_z < 0 s_z = 1 << 5 ELSE s_z = 0 ENDIF s = s_x + s_y + s_z + visibility ax = ABS(normal_x) ay = ABS(normal_y) az = ABS(normal_z) EQUB s, ax, ay, az ENDMACROName: FACE [Show more] Type: Macro Category: Drawing ships Summary: Macro definition for adding faces to ship blueprints Deep dive: Ship blueprintsContext: See this macro on its own page References: This macro is used as follows: * SHIP_ADDER uses FACE * SHIP_BOA uses FACE * SHIP_BOULDER uses FACE * SHIP_CANISTER uses FACE * SHIP_COBRA_MK_1 uses FACE * SHIP_COBRA_MK_3 uses FACE * SHIP_DODO uses FACE * SHIP_ESCAPE_POD uses FACE * SHIP_PLATE uses FACE * SHIP_SIDEWINDER uses FACE * SHIP_VIPER uses FACE
The following macro is used to build the ship blueprints: FACE normal_x, normal_y, normal_z, visibility See the deep dive on "Ship blueprints" for details of how faces are stored in the ship blueprints, and the deep dive on "Drawing ships" for information on how faces are used to draw 3D wireframe ships.
Arguments: normal_x The face normal's x-coordinate normal_y The face normal's y-coordinate normal_z The face normal's z-coordinate visibility The visibility distance, beyond which the edge is always shown.SHIP_DODO EQUB 0 \ Max. canisters on demise = 0 EQUW 180 * 180 \ Targetable area = 180 * 180 EQUB LO(SHIP_DODO_EDGES - SHIP_DODO) \ Edges data offset (low) EQUB LO(SHIP_DODO_FACES - SHIP_DODO) \ Faces data offset (low) EQUB 97 \ Max. edge count = (97 - 1) / 4 = 24 EQUB 0 \ Gun vertex = 0 EQUB 54 \ Explosion count = 12, as (4 * n) + 6 = 54 EQUB 144 \ Number of vertices = 144 / 6 = 24 EQUB 34 \ Number of edges = 34 EQUW 0 \ Bounty = 0 EQUB 48 \ Number of faces = 48 / 4 = 12 EQUB 125 \ Visibility distance = 125 EQUB 240 \ Max. energy = 240 EQUB 0 \ Max. speed = 0 EQUB HI(SHIP_DODO_EDGES - SHIP_DODO) \ Edges data offset (high) EQUB HI(SHIP_DODO_FACES - SHIP_DODO) \ Faces data offset (high) EQUB 0 \ Normals are scaled by = 2^0 = 1 EQUB %00000000 \ Laser power = 0 \ Missiles = 0 .SHIP_DODO_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX 0, 150, 196, 1, 0, 5, 5, 31 \ Vertex 0 VERTEX 143, 46, 196, 1, 0, 2, 2, 31 \ Vertex 1 VERTEX 88, -121, 196, 2, 0, 3, 3, 31 \ Vertex 2 VERTEX -88, -121, 196, 3, 0, 4, 4, 31 \ Vertex 3 VERTEX -143, 46, 196, 4, 0, 5, 5, 31 \ Vertex 4 VERTEX 0, 243, 46, 5, 1, 6, 6, 31 \ Vertex 5 VERTEX 231, 75, 46, 2, 1, 7, 7, 31 \ Vertex 6 VERTEX 143, -196, 46, 3, 2, 8, 8, 31 \ Vertex 7 VERTEX -143, -196, 46, 4, 3, 9, 9, 31 \ Vertex 8 VERTEX -231, 75, 46, 5, 4, 10, 10, 31 \ Vertex 9 VERTEX 143, 196, -46, 6, 1, 7, 7, 31 \ Vertex 10 VERTEX 231, -75, -46, 7, 2, 8, 8, 31 \ Vertex 11 VERTEX 0, -243, -46, 8, 3, 9, 9, 31 \ Vertex 12 VERTEX -231, -75, -46, 9, 4, 10, 10, 31 \ Vertex 13 VERTEX -143, 196, -46, 6, 5, 10, 10, 31 \ Vertex 14 VERTEX 88, 121, -196, 7, 6, 11, 11, 31 \ Vertex 15 VERTEX 143, -46, -196, 8, 7, 11, 11, 31 \ Vertex 16 VERTEX 0, -150, -196, 9, 8, 11, 11, 31 \ Vertex 17 VERTEX -143, -46, -196, 10, 9, 11, 11, 31 \ Vertex 18 VERTEX -88, 121, -196, 10, 6, 11, 11, 31 \ Vertex 19 VERTEX -16, 32, 196, 0, 0, 0, 0, 30 \ Vertex 20 VERTEX -16, -32, 196, 0, 0, 0, 0, 30 \ Vertex 21 VERTEX 16, 32, 196, 0, 0, 0, 0, 23 \ Vertex 22 VERTEX 16, -32, 196, 0, 0, 0, 0, 23 \ Vertex 23 .SHIP_DODO_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 1, 1, 0, 31 \ Edge 0 EDGE 1, 2, 2, 0, 31 \ Edge 1 EDGE 2, 3, 3, 0, 31 \ Edge 2 EDGE 3, 4, 4, 0, 31 \ Edge 3 EDGE 4, 0, 5, 0, 31 \ Edge 4 EDGE 5, 10, 6, 1, 31 \ Edge 5 EDGE 10, 6, 7, 1, 31 \ Edge 6 EDGE 6, 11, 7, 2, 31 \ Edge 7 EDGE 11, 7, 8, 2, 31 \ Edge 8 EDGE 7, 12, 8, 3, 31 \ Edge 9 EDGE 12, 8, 9, 3, 31 \ Edge 10 EDGE 8, 13, 9, 4, 31 \ Edge 11 EDGE 13, 9, 10, 4, 31 \ Edge 12 EDGE 9, 14, 10, 5, 31 \ Edge 13 EDGE 14, 5, 6, 5, 31 \ Edge 14 EDGE 15, 16, 11, 7, 31 \ Edge 15 EDGE 16, 17, 11, 8, 31 \ Edge 16 EDGE 17, 18, 11, 9, 31 \ Edge 17 EDGE 18, 19, 11, 10, 31 \ Edge 18 EDGE 19, 15, 11, 6, 31 \ Edge 19 EDGE 0, 5, 5, 1, 31 \ Edge 20 EDGE 1, 6, 2, 1, 31 \ Edge 21 EDGE 2, 7, 3, 2, 31 \ Edge 22 EDGE 3, 8, 4, 3, 31 \ Edge 23 EDGE 4, 9, 5, 4, 31 \ Edge 24 EDGE 10, 15, 7, 6, 31 \ Edge 25 EDGE 11, 16, 8, 7, 31 \ Edge 26 EDGE 12, 17, 9, 8, 31 \ Edge 27 EDGE 13, 18, 10, 9, 31 \ Edge 28 EDGE 14, 19, 10, 6, 31 \ Edge 29 EDGE 20, 21, 0, 0, 30 \ Edge 30 EDGE 21, 23, 0, 0, 20 \ Edge 31 EDGE 23, 22, 0, 0, 23 \ Edge 32 EDGE 22, 20, 0, 0, 20 \ Edge 33 .SHIP_DODO_FACES \ normal_x, normal_y, normal_z, visibility FACE 0, 0, 196, 31 \ Face 0 FACE 103, 142, 88, 31 \ Face 1 FACE 169, -55, 89, 31 \ Face 2 FACE 0, -176, 88, 31 \ Face 3 FACE -169, -55, 89, 31 \ Face 4 FACE -103, 142, 88, 31 \ Face 5 FACE 0, 176, -88, 31 \ Face 6 FACE 169, 55, -89, 31 \ Face 7 FACE 103, -142, -88, 31 \ Face 8 FACE -103, -142, -88, 31 \ Face 9 FACE -169, 55, -89, 31 \ Face 10 FACE 0, 0, -196, 31 \ Face 11Name: SHIP_DODO [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for a Dodecahedron ("Dodo") space station Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_DODO.SHIP_ESCAPE_POD EQUB 0 + (2 << 4) \ Max. canisters on demise = 0 \ Market item when scooped = 2 + 1 = 3 (slaves) EQUW 16 * 16 \ Targetable area = 16 * 16 EQUB LO(SHIP_ESCAPE_POD_EDGES - SHIP_ESCAPE_POD) \ Edges data offset (low) EQUB LO(SHIP_ESCAPE_POD_FACES - SHIP_ESCAPE_POD) \ Faces data offset (low) EQUB 25 \ Max. edge count = (25 - 1) / 4 = 6 EQUB 0 \ Gun vertex = 0 EQUB 22 \ Explosion count = 4, as (4 * n) + 6 = 22 EQUB 24 \ Number of vertices = 24 / 6 = 4 EQUB 6 \ Number of edges = 6 EQUW 0 \ Bounty = 0 EQUB 16 \ Number of faces = 16 / 4 = 4 EQUB 8 \ Visibility distance = 8 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 17 \ Max. energy = 17 \ --- And replaced by: --------------------------------> EQUB 8 \ Max. energy = 8 \ --- End of replacement ------------------------------> EQUB 8 \ Max. speed = 8 EQUB HI(SHIP_ESCAPE_POD_EDGES - SHIP_ESCAPE_POD) \ Edges data offset (high) EQUB HI(SHIP_ESCAPE_POD_FACES - SHIP_ESCAPE_POD) \ Faces data offset (high) EQUB 4 \ Normals are scaled by = 2^4 = 16 EQUB %00000000 \ Laser power = 0 \ Missiles = 0 .SHIP_ESCAPE_POD_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX -7, 0, 36, 2, 1, 3, 3, 31 \ Vertex 0 VERTEX -7, -14, -12, 2, 0, 3, 3, 31 \ Vertex 1 VERTEX -7, 14, -12, 1, 0, 3, 3, 31 \ Vertex 2 VERTEX 21, 0, 0, 1, 0, 2, 2, 31 \ Vertex 3 .SHIP_ESCAPE_POD_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 1, 3, 2, 31 \ Edge 0 EDGE 1, 2, 3, 0, 31 \ Edge 1 EDGE 2, 3, 1, 0, 31 \ Edge 2 EDGE 3, 0, 2, 1, 31 \ Edge 3 EDGE 0, 2, 3, 1, 31 \ Edge 4 EDGE 3, 1, 2, 0, 31 \ Edge 5 .SHIP_ESCAPE_POD_FACES \ normal_x, normal_y, normal_z, visibility FACE 52, 0, -122, 31 \ Face 0 FACE 39, 103, 30, 31 \ Face 1 FACE 39, -103, 30, 31 \ Face 2 FACE -112, 0, 0, 31 \ Face 3Name: SHIP_ESCAPE_POD [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for an escape pod Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_ESCAPE_POD.SHIP_CANISTER EQUB 0 \ Max. canisters on demise = 0 EQUW 20 * 20 \ Targetable area = 20 * 20 EQUB LO(SHIP_CANISTER_EDGES - SHIP_CANISTER) \ Edges data offset (low) EQUB LO(SHIP_CANISTER_FACES - SHIP_CANISTER) \ Faces data offset (low) EQUB 49 \ Max. edge count = (49 - 1) / 4 = 12 EQUB 0 \ Gun vertex = 0 EQUB 18 \ Explosion count = 3, as (4 * n) + 6 = 18 EQUB 60 \ Number of vertices = 60 / 6 = 10 EQUB 15 \ Number of edges = 15 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUW 0 \ Bounty = 0 \ --- And replaced by: --------------------------------> EQUW 1 \ Bounty = 1 \ --- End of replacement ------------------------------> EQUB 28 \ Number of faces = 28 / 4 = 7 EQUB 12 \ Visibility distance = 12 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 17 \ Max. energy = 17 \ --- And replaced by: --------------------------------> EQUB 8 \ Max. energy = 8 \ --- End of replacement ------------------------------> EQUB 15 \ Max. speed = 15 EQUB HI(SHIP_CANISTER_EDGES - SHIP_CANISTER) \ Edges data offset (high) EQUB HI(SHIP_CANISTER_FACES - SHIP_CANISTER) \ Faces data offset (high) EQUB 2 \ Normals are scaled by = 2^2 = 4 EQUB %00000000 \ Laser power = 0 \ Missiles = 0 .SHIP_CANISTER_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX 24, 16, 0, 0, 1, 5, 5, 31 \ Vertex 0 VERTEX 24, 5, 15, 0, 1, 2, 2, 31 \ Vertex 1 VERTEX 24, -13, 9, 0, 2, 3, 3, 31 \ Vertex 2 VERTEX 24, -13, -9, 0, 3, 4, 4, 31 \ Vertex 3 VERTEX 24, 5, -15, 0, 4, 5, 5, 31 \ Vertex 4 VERTEX -24, 16, 0, 1, 5, 6, 6, 31 \ Vertex 5 VERTEX -24, 5, 15, 1, 2, 6, 6, 31 \ Vertex 6 VERTEX -24, -13, 9, 2, 3, 6, 6, 31 \ Vertex 7 VERTEX -24, -13, -9, 3, 4, 6, 6, 31 \ Vertex 8 VERTEX -24, 5, -15, 4, 5, 6, 6, 31 \ Vertex 9 .SHIP_CANISTER_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 1, 0, 1, 31 \ Edge 0 EDGE 1, 2, 0, 2, 31 \ Edge 1 EDGE 2, 3, 0, 3, 31 \ Edge 2 EDGE 3, 4, 0, 4, 31 \ Edge 3 EDGE 0, 4, 0, 5, 31 \ Edge 4 EDGE 0, 5, 1, 5, 31 \ Edge 5 EDGE 1, 6, 1, 2, 31 \ Edge 6 EDGE 2, 7, 2, 3, 31 \ Edge 7 EDGE 3, 8, 3, 4, 31 \ Edge 8 EDGE 4, 9, 4, 5, 31 \ Edge 9 EDGE 5, 6, 1, 6, 31 \ Edge 10 EDGE 6, 7, 2, 6, 31 \ Edge 11 EDGE 7, 8, 3, 6, 31 \ Edge 12 EDGE 8, 9, 4, 6, 31 \ Edge 13 EDGE 9, 5, 5, 6, 31 \ Edge 14 .SHIP_CANISTER_FACES \ normal_x, normal_y, normal_z, visibility FACE 96, 0, 0, 31 \ Face 0 FACE 0, 41, 30, 31 \ Face 1 FACE 0, -18, 48, 31 \ Face 2 FACE 0, -51, 0, 31 \ Face 3 FACE 0, -18, -48, 31 \ Face 4 FACE 0, 41, -30, 31 \ Face 5 FACE -96, 0, 0, 31 \ Face 6Name: SHIP_CANISTER [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for a cargo canister Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_CANISTER.SHIP_VIPER EQUB 0 \ Max. canisters on demise = 0 EQUW 75 * 75 \ Targetable area = 75 * 75 EQUB LO(SHIP_VIPER_EDGES - SHIP_VIPER) \ Edges data offset (low) EQUB LO(SHIP_VIPER_FACES - SHIP_VIPER) \ Faces data offset (low) EQUB 77 \ Max. edge count = (77 - 1) / 4 = 19 EQUB 0 \ Gun vertex = 0 EQUB 42 \ Explosion count = 9, as (4 * n) + 6 = 42 EQUB 90 \ Number of vertices = 90 / 6 = 15 EQUB 20 \ Number of edges = 20 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUW 0 \ Bounty = 0 \ --- And replaced by: --------------------------------> EQUW 200 \ Bounty = 100 \ --- End of replacement ------------------------------> EQUB 28 \ Number of faces = 28 / 4 = 7 EQUB 23 \ Visibility distance = 23 EQUB 100 \ Max. energy = 100 EQUB 32 \ Max. speed = 32 EQUB HI(SHIP_VIPER_EDGES - SHIP_VIPER) \ Edges data offset (high) EQUB HI(SHIP_VIPER_FACES - SHIP_VIPER) \ Faces data offset (high) EQUB 1 \ Normals are scaled by = 2^1 = 2 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB %00010001 \ Laser power = 2 \ \ Missiles = 1 \ --- And replaced by: --------------------------------> EQUB %00101001 \ Laser power = 5 \ Missiles = 1 \ --- End of replacement ------------------------------> .SHIP_VIPER_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX 0, 0, 72, 1, 2, 3, 4, 31 \ Vertex 0 VERTEX 0, 16, 24, 0, 1, 2, 2, 30 \ Vertex 1 VERTEX 0, -16, 24, 3, 4, 5, 5, 30 \ Vertex 2 VERTEX 48, 0, -24, 2, 4, 6, 6, 31 \ Vertex 3 VERTEX -48, 0, -24, 1, 3, 6, 6, 31 \ Vertex 4 VERTEX 24, -16, -24, 4, 5, 6, 6, 30 \ Vertex 5 VERTEX -24, -16, -24, 5, 3, 6, 6, 30 \ Vertex 6 VERTEX 24, 16, -24, 0, 2, 6, 6, 31 \ Vertex 7 VERTEX -24, 16, -24, 0, 1, 6, 6, 31 \ Vertex 8 VERTEX -32, 0, -24, 6, 6, 6, 6, 19 \ Vertex 9 VERTEX 32, 0, -24, 6, 6, 6, 6, 19 \ Vertex 10 VERTEX 8, 8, -24, 6, 6, 6, 6, 19 \ Vertex 11 VERTEX -8, 8, -24, 6, 6, 6, 6, 19 \ Vertex 12 VERTEX -8, -8, -24, 6, 6, 6, 6, 18 \ Vertex 13 VERTEX 8, -8, -24, 6, 6, 6, 6, 18 \ Vertex 14 .SHIP_VIPER_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 3, 2, 4, 31 \ Edge 0 EDGE 0, 1, 1, 2, 30 \ Edge 1 EDGE 0, 2, 3, 4, 30 \ Edge 2 EDGE 0, 4, 1, 3, 31 \ Edge 3 EDGE 1, 7, 0, 2, 30 \ Edge 4 EDGE 1, 8, 0, 1, 30 \ Edge 5 EDGE 2, 5, 4, 5, 30 \ Edge 6 EDGE 2, 6, 3, 5, 30 \ Edge 7 EDGE 7, 8, 0, 6, 31 \ Edge 8 EDGE 5, 6, 5, 6, 30 \ Edge 9 EDGE 4, 8, 1, 6, 31 \ Edge 10 EDGE 4, 6, 3, 6, 30 \ Edge 11 EDGE 3, 7, 2, 6, 31 \ Edge 12 EDGE 3, 5, 6, 4, 30 \ Edge 13 EDGE 9, 12, 6, 6, 19 \ Edge 14 EDGE 9, 13, 6, 6, 18 \ Edge 15 EDGE 10, 11, 6, 6, 19 \ Edge 16 EDGE 10, 14, 6, 6, 18 \ Edge 17 EDGE 11, 14, 6, 6, 16 \ Edge 18 EDGE 12, 13, 6, 6, 16 \ Edge 19 .SHIP_VIPER_FACES \ normal_x, normal_y, normal_z, visibility FACE 0, 32, 0, 31 \ Face 0 FACE -22, 33, 11, 31 \ Face 1 FACE 22, 33, 11, 31 \ Face 2 FACE -22, -33, 11, 31 \ Face 3 FACE 22, -33, 11, 31 \ Face 4 FACE 0, -32, 0, 31 \ Face 5 FACE 0, 0, -48, 31 \ Face 6Name: SHIP_VIPER [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for a Viper Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_VIPER.SHIP_COBRA_MK_1 EQUB 3 \ Max. canisters on demise = 3 EQUW 99 * 99 \ Targetable area = 99 * 99 EQUB LO(SHIP_COBRA_MK_1_EDGES - SHIP_COBRA_MK_1) \ Edges data offset (low) EQUB LO(SHIP_COBRA_MK_1_FACES - SHIP_COBRA_MK_1) \ Faces data offset (low) EQUB 69 \ Max. edge count = (69 - 1) / 4 = 17 EQUB 40 \ Gun vertex = 40 / 4 = 10 EQUB 26 \ Explosion count = 5, as (4 * n) + 6 = 26 EQUB 66 \ Number of vertices = 66 / 6 = 11 EQUB 18 \ Number of edges = 18 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUW 75 \ Bounty = 75 \ --- And replaced by: --------------------------------> EQUW 175 \ Bounty = 175 \ --- End of replacement ------------------------------> EQUB 40 \ Number of faces = 40 / 4 = 10 EQUB 19 \ Visibility distance = 19 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 90 \ Max. energy = 90 \ --- And replaced by: --------------------------------> EQUB 81 \ Max. energy = 81 \ --- End of replacement ------------------------------> EQUB 26 \ Max. speed = 26 EQUB HI(SHIP_COBRA_MK_1_EDGES - SHIP_COBRA_MK_1) \ Edges data offset (high) EQUB HI(SHIP_COBRA_MK_1_FACES - SHIP_COBRA_MK_1) \ Faces data offset (high) EQUB 2 \ Normals are scaled by = 2^2 = 4 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB %00010010 \ Laser power = 2 \ \ Missiles = 2 \ --- And replaced by: --------------------------------> EQUB %00101010 \ Laser power = 5 \ Missiles = 2 \ --- End of replacement ------------------------------> .SHIP_COBRA_MK_1_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX -18, -1, 50, 1, 0, 3, 2, 31 \ Vertex 0 VERTEX 18, -1, 50, 1, 0, 5, 4, 31 \ Vertex 1 VERTEX -66, 0, 7, 3, 2, 8, 8, 31 \ Vertex 2 VERTEX 66, 0, 7, 5, 4, 9, 9, 31 \ Vertex 3 VERTEX -32, 12, -38, 6, 2, 8, 7, 31 \ Vertex 4 VERTEX 32, 12, -38, 6, 4, 9, 7, 31 \ Vertex 5 VERTEX -54, -12, -38, 3, 1, 8, 7, 31 \ Vertex 6 VERTEX 54, -12, -38, 5, 1, 9, 7, 31 \ Vertex 7 VERTEX 0, 12, -6, 2, 0, 6, 4, 20 \ Vertex 8 VERTEX 0, -1, 50, 1, 0, 1, 1, 2 \ Vertex 9 VERTEX 0, -1, 60, 1, 0, 1, 1, 31 \ Vertex 10 .SHIP_COBRA_MK_1_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 1, 0, 1, 0, 31 \ Edge 0 EDGE 0, 2, 3, 2, 31 \ Edge 1 EDGE 2, 6, 8, 3, 31 \ Edge 2 EDGE 6, 7, 7, 1, 31 \ Edge 3 EDGE 7, 3, 9, 5, 31 \ Edge 4 EDGE 3, 1, 5, 4, 31 \ Edge 5 EDGE 2, 4, 8, 2, 31 \ Edge 6 EDGE 4, 5, 7, 6, 31 \ Edge 7 EDGE 5, 3, 9, 4, 31 \ Edge 8 EDGE 0, 8, 2, 0, 20 \ Edge 9 EDGE 8, 1, 4, 0, 20 \ Edge 10 EDGE 4, 8, 6, 2, 16 \ Edge 11 EDGE 8, 5, 6, 4, 16 \ Edge 12 EDGE 4, 6, 8, 7, 31 \ Edge 13 EDGE 5, 7, 9, 7, 31 \ Edge 14 EDGE 0, 6, 3, 1, 20 \ Edge 15 EDGE 1, 7, 5, 1, 20 \ Edge 16 EDGE 10, 9, 1, 0, 2 \ Edge 17 .SHIP_COBRA_MK_1_FACES \ normal_x, normal_y, normal_z, visibility FACE 0, 41, 10, 31 \ Face 0 FACE 0, -27, 3, 31 \ Face 1 FACE -8, 46, 8, 31 \ Face 2 FACE -12, -57, 12, 31 \ Face 3 FACE 8, 46, 8, 31 \ Face 4 FACE 12, -57, 12, 31 \ Face 5 FACE 0, 49, 0, 31 \ Face 6 FACE 0, 0, -154, 31 \ Face 7 FACE -121, 111, -62, 31 \ Face 8 FACE 121, 111, -62, 31 \ Face 9Name: SHIP_COBRA_MK_1 [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for a Cobra Mk I Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_COBRA_MK_1.SHIP_SIDEWINDER EQUB 0 \ Max. canisters on demise = 0 EQUW 65 * 65 \ Targetable area = 65 * 65 EQUB LO(SHIP_SIDEWINDER_EDGES - SHIP_SIDEWINDER) \ Edges data offset (low) EQUB LO(SHIP_SIDEWINDER_FACES - SHIP_SIDEWINDER) \ Faces data offset (low) EQUB 61 \ Max. edge count = (61 - 1) / 4 = 15 EQUB 0 \ Gun vertex = 0 EQUB 30 \ Explosion count = 6, as (4 * n) + 6 = 30 EQUB 60 \ Number of vertices = 60 / 6 = 10 EQUB 15 \ Number of edges = 15 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUW 50 \ Bounty = 50 \ --- And replaced by: --------------------------------> EQUW 400 \ Bounty = 400 \ --- End of replacement ------------------------------> EQUB 28 \ Number of faces = 28 / 4 = 7 EQUB 20 \ Visibility distance = 20 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 70 \ Max. energy = 70 \ --- And replaced by: --------------------------------> EQUB 82 \ Max. energy = 82 \ --- End of replacement ------------------------------> EQUB 37 \ Max. speed = 37 EQUB HI(SHIP_SIDEWINDER_EDGES - SHIP_SIDEWINDER) \ Edges data offset (high) EQUB HI(SHIP_SIDEWINDER_FACES - SHIP_SIDEWINDER) \ Faces data offset (high) EQUB 2 \ Normals are scaled by = 2^2 = 4 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB %00010000 \ Laser power = 2 \ \ Missiles = 0 \ --- And replaced by: --------------------------------> EQUB %00101000 \ Laser power = 5 \ Missiles = 0 \ --- End of replacement ------------------------------> .SHIP_SIDEWINDER_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX -32, 0, 36, 0, 1, 4, 5, 31 \ Vertex 0 VERTEX 32, 0, 36, 0, 2, 5, 6, 31 \ Vertex 1 VERTEX 64, 0, -28, 2, 3, 6, 6, 31 \ Vertex 2 VERTEX -64, 0, -28, 1, 3, 4, 4, 31 \ Vertex 3 VERTEX 0, 16, -28, 0, 1, 2, 3, 31 \ Vertex 4 VERTEX 0, -16, -28, 3, 4, 5, 6, 31 \ Vertex 5 VERTEX -12, 6, -28, 3, 3, 3, 3, 15 \ Vertex 6 VERTEX 12, 6, -28, 3, 3, 3, 3, 15 \ Vertex 7 VERTEX 12, -6, -28, 3, 3, 3, 3, 12 \ Vertex 8 VERTEX -12, -6, -28, 3, 3, 3, 3, 12 \ Vertex 9 .SHIP_SIDEWINDER_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 1, 0, 5, 31 \ Edge 0 EDGE 1, 2, 2, 6, 31 \ Edge 1 EDGE 1, 4, 0, 2, 31 \ Edge 2 EDGE 0, 4, 0, 1, 31 \ Edge 3 EDGE 0, 3, 1, 4, 31 \ Edge 4 EDGE 3, 4, 1, 3, 31 \ Edge 5 EDGE 2, 4, 2, 3, 31 \ Edge 6 EDGE 3, 5, 3, 4, 31 \ Edge 7 EDGE 2, 5, 3, 6, 31 \ Edge 8 EDGE 1, 5, 5, 6, 31 \ Edge 9 EDGE 0, 5, 4, 5, 31 \ Edge 10 EDGE 6, 7, 3, 3, 15 \ Edge 11 EDGE 7, 8, 3, 3, 12 \ Edge 12 EDGE 6, 9, 3, 3, 12 \ Edge 13 EDGE 8, 9, 3, 3, 12 \ Edge 14 .SHIP_SIDEWINDER_FACES \ normal_x, normal_y, normal_z, visibility FACE 0, 32, 8, 31 \ Face 0 FACE -12, 47, 6, 31 \ Face 1 FACE 12, 47, 6, 31 \ Face 2 FACE 0, 0, -112, 31 \ Face 3 FACE -12, -47, 6, 31 \ Face 4 FACE 0, -32, 8, 31 \ Face 5 FACE 12, -47, 6, 31 \ Face 6Name: SHIP_SIDEWINDER [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for a Sidewinder Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_SIDEWINDER.SHIP_BOULDER EQUB 0 \ Max. canisters on demise = 0 EQUW 30 * 30 \ Targetable area = 30 * 30 EQUB LO(SHIP_BOULDER_EDGES - SHIP_BOULDER) \ Edges data offset (low) EQUB LO(SHIP_BOULDER_FACES - SHIP_BOULDER) \ Faces data offset (low) EQUB 45 \ Max. edge count = (45 - 1) / 4 = 11 EQUB 0 \ Gun vertex = 0 EQUB 14 \ Explosion count = 2, as (4 * n) + 6 = 14 EQUB 42 \ Number of vertices = 42 / 6 = 7 EQUB 15 \ Number of edges = 15 EQUW 1 \ Bounty = 1 EQUB 40 \ Number of faces = 40 / 4 = 10 EQUB 20 \ Visibility distance = 20 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 20 \ Max. energy = 20 \ --- And replaced by: --------------------------------> EQUB 16 \ Max. energy = 16 \ --- End of replacement ------------------------------> EQUB 30 \ Max. speed = 30 EQUB HI(SHIP_BOULDER_EDGES - SHIP_BOULDER) \ Edges data offset (high) EQUB HI(SHIP_BOULDER_FACES - SHIP_BOULDER) \ Faces data offset (high) EQUB 2 \ Normals are scaled by = 2^2 = 4 EQUB %00000000 \ Laser power = 0 \ Missiles = 0 .SHIP_BOULDER_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX -18, 37, -11, 1, 0, 9, 5, 31 \ Vertex 0 VERTEX 30, 7, 12, 2, 1, 6, 5, 31 \ Vertex 1 VERTEX 28, -7, -12, 3, 2, 7, 6, 31 \ Vertex 2 VERTEX 2, 0, -39, 4, 3, 8, 7, 31 \ Vertex 3 VERTEX -28, 34, -30, 4, 0, 9, 8, 31 \ Vertex 4 VERTEX 5, -10, 13, 15, 15, 15, 15, 31 \ Vertex 5 VERTEX 20, 17, -30, 15, 15, 15, 15, 31 \ Vertex 6 .SHIP_BOULDER_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 1, 5, 1, 31 \ Edge 0 EDGE 1, 2, 6, 2, 31 \ Edge 1 EDGE 2, 3, 7, 3, 31 \ Edge 2 EDGE 3, 4, 8, 4, 31 \ Edge 3 EDGE 4, 0, 9, 0, 31 \ Edge 4 EDGE 0, 5, 1, 0, 31 \ Edge 5 EDGE 1, 5, 2, 1, 31 \ Edge 6 EDGE 2, 5, 3, 2, 31 \ Edge 7 EDGE 3, 5, 4, 3, 31 \ Edge 8 EDGE 4, 5, 4, 0, 31 \ Edge 9 EDGE 0, 6, 9, 5, 31 \ Edge 10 EDGE 1, 6, 6, 5, 31 \ Edge 11 EDGE 2, 6, 7, 6, 31 \ Edge 12 EDGE 3, 6, 8, 7, 31 \ Edge 13 EDGE 4, 6, 9, 8, 31 \ Edge 14 .SHIP_BOULDER_FACES \ normal_x, normal_y, normal_z, visibility FACE -15, -3, 8, 31 \ Face 0 FACE -7, 12, 30, 31 \ Face 1 FACE 32, -47, 24, 31 \ Face 2 FACE -3, -39, -7, 31 \ Face 3 FACE -5, -4, -1, 31 \ Face 4 FACE 49, 84, 8, 31 \ Face 5 FACE 112, 21, -21, 31 \ Face 6 FACE 76, -35, -82, 31 \ Face 7 FACE 22, 56, -137, 31 \ Face 8 FACE 40, 110, -38, 31 \ Face 9Name: SHIP_BOULDER [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for a boulder Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_BOULDER.SHIP_COBRA_MK_3 EQUB 3 \ Max. canisters on demise = 3 EQUW 95 * 95 \ Targetable area = 95 * 95 EQUB LO(SHIP_COBRA_MK_3_EDGES - SHIP_COBRA_MK_3) \ Edges data offset (low) EQUB LO(SHIP_COBRA_MK_3_FACES - SHIP_COBRA_MK_3) \ Faces data offset (low) EQUB 153 \ Max. edge count = (153 - 1) / 4 = 38 EQUB 84 \ Gun vertex = 84 / 4 = 21 EQUB 42 \ Explosion count = 9, as (4 * n) + 6 = 42 EQUB 168 \ Number of vertices = 168 / 6 = 28 EQUB 38 \ Number of edges = 38 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUW 0 \ Bounty = 0 \ --- And replaced by: --------------------------------> EQUW 300 \ Bounty = 300 \ --- End of replacement ------------------------------> EQUB 52 \ Number of faces = 52 / 4 = 13 EQUB 50 \ Visibility distance = 50 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 150 \ Max. energy = 150 \ --- And replaced by: --------------------------------> EQUB 106 \ Max. energy = 106 \ --- End of replacement ------------------------------> EQUB 28 \ Max. speed = 28 EQUB HI(SHIP_COBRA_MK_3_EDGES - SHIP_COBRA_MK_3) \ Edges data offset (low) EQUB HI(SHIP_COBRA_MK_3_FACES - SHIP_COBRA_MK_3) \ Faces data offset (low) EQUB 1 \ Normals are scaled by = 2^1 = 2 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB %00010011 \ Laser power = 2 \ \ Missiles = 3 \ --- And replaced by: --------------------------------> EQUB %00100100 \ Laser power = 4 \ Missiles = 4 \ --- End of replacement ------------------------------> .SHIP_COBRA_MK_3_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX 32, 0, 76, 15, 15, 15, 15, 31 \ Vertex 0 VERTEX -32, 0, 76, 15, 15, 15, 15, 31 \ Vertex 1 VERTEX 0, 26, 24, 15, 15, 15, 15, 31 \ Vertex 2 VERTEX -120, -3, -8, 3, 7, 10, 10, 31 \ Vertex 3 VERTEX 120, -3, -8, 4, 8, 12, 12, 31 \ Vertex 4 VERTEX -88, 16, -40, 15, 15, 15, 15, 31 \ Vertex 5 VERTEX 88, 16, -40, 15, 15, 15, 15, 31 \ Vertex 6 VERTEX 128, -8, -40, 8, 9, 12, 12, 31 \ Vertex 7 VERTEX -128, -8, -40, 7, 9, 10, 10, 31 \ Vertex 8 VERTEX 0, 26, -40, 5, 6, 9, 9, 31 \ Vertex 9 VERTEX -32, -24, -40, 9, 10, 11, 11, 31 \ Vertex 10 VERTEX 32, -24, -40, 9, 11, 12, 12, 31 \ Vertex 11 VERTEX -36, 8, -40, 9, 9, 9, 9, 20 \ Vertex 12 VERTEX -8, 12, -40, 9, 9, 9, 9, 20 \ Vertex 13 VERTEX 8, 12, -40, 9, 9, 9, 9, 20 \ Vertex 14 VERTEX 36, 8, -40, 9, 9, 9, 9, 20 \ Vertex 15 VERTEX 36, -12, -40, 9, 9, 9, 9, 20 \ Vertex 16 VERTEX 8, -16, -40, 9, 9, 9, 9, 20 \ Vertex 17 VERTEX -8, -16, -40, 9, 9, 9, 9, 20 \ Vertex 18 VERTEX -36, -12, -40, 9, 9, 9, 9, 20 \ Vertex 19 VERTEX 0, 0, 76, 0, 11, 11, 11, 6 \ Vertex 20 VERTEX 0, 0, 90, 0, 11, 11, 11, 31 \ Vertex 21 VERTEX -80, -6, -40, 9, 9, 9, 9, 8 \ Vertex 22 VERTEX -80, 6, -40, 9, 9, 9, 9, 8 \ Vertex 23 VERTEX -88, 0, -40, 9, 9, 9, 9, 6 \ Vertex 24 VERTEX 80, 6, -40, 9, 9, 9, 9, 8 \ Vertex 25 VERTEX 88, 0, -40, 9, 9, 9, 9, 6 \ Vertex 26 VERTEX 80, -6, -40, 9, 9, 9, 9, 8 \ Vertex 27 .SHIP_COBRA_MK_3_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 1, 0, 11, 31 \ Edge 0 EDGE 0, 4, 4, 12, 31 \ Edge 1 EDGE 1, 3, 3, 10, 31 \ Edge 2 EDGE 3, 8, 7, 10, 31 \ Edge 3 EDGE 4, 7, 8, 12, 31 \ Edge 4 EDGE 6, 7, 8, 9, 31 \ Edge 5 EDGE 6, 9, 6, 9, 31 \ Edge 6 EDGE 5, 9, 5, 9, 31 \ Edge 7 EDGE 5, 8, 7, 9, 31 \ Edge 8 EDGE 2, 5, 1, 5, 31 \ Edge 9 EDGE 2, 6, 2, 6, 31 \ Edge 10 EDGE 3, 5, 3, 7, 31 \ Edge 11 EDGE 4, 6, 4, 8, 31 \ Edge 12 EDGE 1, 2, 0, 1, 31 \ Edge 13 EDGE 0, 2, 0, 2, 31 \ Edge 14 EDGE 8, 10, 9, 10, 31 \ Edge 15 EDGE 10, 11, 9, 11, 31 \ Edge 16 EDGE 7, 11, 9, 12, 31 \ Edge 17 EDGE 1, 10, 10, 11, 31 \ Edge 18 EDGE 0, 11, 11, 12, 31 \ Edge 19 EDGE 1, 5, 1, 3, 29 \ Edge 20 EDGE 0, 6, 2, 4, 29 \ Edge 21 EDGE 20, 21, 0, 11, 6 \ Edge 22 EDGE 12, 13, 9, 9, 20 \ Edge 23 EDGE 18, 19, 9, 9, 20 \ Edge 24 EDGE 14, 15, 9, 9, 20 \ Edge 25 EDGE 16, 17, 9, 9, 20 \ Edge 26 EDGE 15, 16, 9, 9, 19 \ Edge 27 EDGE 14, 17, 9, 9, 17 \ Edge 28 EDGE 13, 18, 9, 9, 19 \ Edge 29 EDGE 12, 19, 9, 9, 19 \ Edge 30 EDGE 2, 9, 5, 6, 30 \ Edge 31 EDGE 22, 24, 9, 9, 6 \ Edge 32 EDGE 23, 24, 9, 9, 6 \ Edge 33 EDGE 22, 23, 9, 9, 8 \ Edge 34 EDGE 25, 26, 9, 9, 6 \ Edge 35 EDGE 26, 27, 9, 9, 6 \ Edge 36 EDGE 25, 27, 9, 9, 8 \ Edge 37 .SHIP_COBRA_MK_3_FACES \ normal_x, normal_y, normal_z, visibility FACE 0, 62, 31, 31 \ Face 0 FACE -18, 55, 16, 31 \ Face 1 FACE 18, 55, 16, 31 \ Face 2 FACE -16, 52, 14, 31 \ Face 3 FACE 16, 52, 14, 31 \ Face 4 FACE -14, 47, 0, 31 \ Face 5 FACE 14, 47, 0, 31 \ Face 6 FACE -61, 102, 0, 31 \ Face 7 FACE 61, 102, 0, 31 \ Face 8 FACE 0, 0, -80, 31 \ Face 9 FACE -7, -42, 9, 31 \ Face 10 FACE 0, -30, 6, 31 \ Face 11 FACE 7, -42, 9, 31 \ Face 12Name: SHIP_COBRA_MK_3 [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for a Cobra Mk III Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_COBRA_MK_3.SHIP_BOA EQUB 5 \ Max. canisters on demise = 5 EQUW 70 * 70 \ Targetable area = 70 * 70 EQUB LO(SHIP_BOA_EDGES - SHIP_BOA) \ Edges data offset (low) EQUB LO(SHIP_BOA_FACES - SHIP_BOA) \ Faces data offset (low) EQUB 89 \ Max. edge count = (89 - 1) / 4 = 22 EQUB 0 \ Gun vertex = 0 EQUB 38 \ Explosion count = 8, as (4 * n) + 6 = 38 EQUB 78 \ Number of vertices = 78 / 6 = 13 EQUB 24 \ Number of edges = 24 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUW 0 \ Bounty = 0 \ --- And replaced by: --------------------------------> EQUW 350 \ Bounty = 350 \ --- End of replacement ------------------------------> EQUB 52 \ Number of faces = 52 / 4 = 13 EQUB 40 \ Visibility distance = 40 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 250 \ Max. energy = 250 \ --- And replaced by: --------------------------------> EQUB 164 \ Max. energy = 164 \ --- End of replacement ------------------------------> EQUB 24 \ Max. speed = 24 EQUB HI(SHIP_BOA_EDGES - SHIP_BOA) \ Edges data offset (high) EQUB HI(SHIP_BOA_FACES - SHIP_BOA) \ Faces data offset (high) EQUB 0 \ Normals are scaled by = 2^0 = 1 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB %00011100 \ Laser power = 3 \ \ Missiles = 4 \ --- And replaced by: --------------------------------> EQUB %00110010 \ Laser power = 6 \ Missiles = 2 \ --- End of replacement ------------------------------> .SHIP_BOA_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX 0, 0, 93, 15, 15, 15, 15, 31 \ Vertex 0 VERTEX 0, 40, -87, 2, 0, 3, 3, 24 \ Vertex 1 VERTEX 38, -25, -99, 1, 0, 4, 4, 24 \ Vertex 2 VERTEX -38, -25, -99, 2, 1, 5, 5, 24 \ Vertex 3 VERTEX -38, 40, -59, 3, 2, 9, 6, 31 \ Vertex 4 VERTEX 38, 40, -59, 3, 0, 11, 6, 31 \ Vertex 5 VERTEX 62, 0, -67, 4, 0, 11, 8, 31 \ Vertex 6 VERTEX 24, -65, -79, 4, 1, 10, 8, 31 \ Vertex 7 VERTEX -24, -65, -79, 5, 1, 10, 7, 31 \ Vertex 8 VERTEX -62, 0, -67, 5, 2, 9, 7, 31 \ Vertex 9 VERTEX 0, 7, -107, 2, 0, 10, 10, 22 \ Vertex 10 VERTEX 13, -9, -107, 1, 0, 10, 10, 22 \ Vertex 11 VERTEX -13, -9, -107, 2, 1, 12, 12, 22 \ Vertex 12 .SHIP_BOA_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 5, 11, 6, 31 \ Edge 0 EDGE 0, 7, 10, 8, 31 \ Edge 1 EDGE 0, 9, 9, 7, 31 \ Edge 2 EDGE 0, 4, 9, 6, 29 \ Edge 3 EDGE 0, 6, 11, 8, 29 \ Edge 4 EDGE 0, 8, 10, 7, 29 \ Edge 5 EDGE 4, 5, 6, 3, 31 \ Edge 6 EDGE 5, 6, 11, 0, 31 \ Edge 7 EDGE 6, 7, 8, 4, 31 \ Edge 8 EDGE 7, 8, 10, 1, 31 \ Edge 9 EDGE 8, 9, 7, 5, 31 \ Edge 10 EDGE 4, 9, 9, 2, 31 \ Edge 11 EDGE 1, 4, 3, 2, 24 \ Edge 12 EDGE 1, 5, 3, 0, 24 \ Edge 13 EDGE 3, 9, 5, 2, 24 \ Edge 14 EDGE 3, 8, 5, 1, 24 \ Edge 15 EDGE 2, 6, 4, 0, 24 \ Edge 16 EDGE 2, 7, 4, 1, 24 \ Edge 17 EDGE 1, 10, 2, 0, 22 \ Edge 18 EDGE 2, 11, 1, 0, 22 \ Edge 19 EDGE 3, 12, 2, 1, 22 \ Edge 20 EDGE 10, 11, 12, 0, 14 \ Edge 21 EDGE 11, 12, 12, 1, 14 \ Edge 22 EDGE 12, 10, 12, 2, 14 \ Edge 23 .SHIP_BOA_FACES \ normal_x, normal_y, normal_z, visibility FACE 43, 37, -60, 31 \ Face 0 FACE 0, -45, -89, 31 \ Face 1 FACE -43, 37, -60, 31 \ Face 2 FACE 0, 40, 0, 31 \ Face 3 FACE 62, -32, -20, 31 \ Face 4 FACE -62, -32, -20, 31 \ Face 5 FACE 0, 23, 6, 31 \ Face 6 FACE -23, -15, 9, 31 \ Face 7 FACE 23, -15, 9, 31 \ Face 8 FACE -26, 13, 10, 31 \ Face 9 FACE 0, -31, 12, 31 \ Face 10 FACE 26, 13, 10, 31 \ Face 11 FACE 0, 0, -107, 14 \ Face 12Name: SHIP_BOA [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for a Boa Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_BOA.SHIP_ADDER EQUB 0 \ Max. canisters on demise = 0 EQUW 50 * 50 \ Targetable area = 50 * 50 EQUB LO(SHIP_ADDER_EDGES - SHIP_ADDER) \ Edges data offset (low) EQUB LO(SHIP_ADDER_FACES - SHIP_ADDER) \ Faces data offset (low) EQUB 97 \ Max. edge count = (97 - 1) / 4 = 24 EQUB 0 \ Gun vertex = 0 EQUB 22 \ Explosion count = 4, as (4 * n) + 6 = 22 EQUB 108 \ Number of vertices = 108 / 6 = 18 EQUB 29 \ Number of edges = 29 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUW 40 \ Bounty = 40 \ --- And replaced by: --------------------------------> EQUW 340 \ Bounty = 340 \ --- End of replacement ------------------------------> EQUB 60 \ Number of faces = 60 / 4 = 15 EQUB 23 \ Visibility distance = 23 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 85 \ Max. energy = 85 \ --- And replaced by: --------------------------------> EQUB 81 \ Max. energy = 81 \ --- End of replacement ------------------------------> EQUB 24 \ Max. speed = 24 EQUB HI(SHIP_ADDER_EDGES - SHIP_ADDER) \ Edges data offset (high) EQUB HI(SHIP_ADDER_FACES - SHIP_ADDER) \ Faces data offset (high) EQUB 2 \ Normals are scaled by = 2^2 = 4 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB %00010000 \ Laser power = 2 \ \ Missiles = 0 \ --- And replaced by: --------------------------------> EQUB %00101001 \ Laser power = 5 \ Missiles = 1 \ --- End of replacement ------------------------------> .SHIP_ADDER_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX -18, 0, 40, 1, 0, 12, 11, 31 \ Vertex 0 VERTEX 18, 0, 40, 1, 0, 3, 2, 31 \ Vertex 1 VERTEX 30, 0, -24, 3, 2, 5, 4, 31 \ Vertex 2 VERTEX 30, 0, -40, 5, 4, 6, 6, 31 \ Vertex 3 VERTEX 18, -7, -40, 6, 5, 14, 7, 31 \ Vertex 4 VERTEX -18, -7, -40, 8, 7, 14, 10, 31 \ Vertex 5 VERTEX -30, 0, -40, 9, 8, 10, 10, 31 \ Vertex 6 VERTEX -30, 0, -24, 10, 9, 12, 11, 31 \ Vertex 7 VERTEX -18, 7, -40, 8, 7, 13, 9, 31 \ Vertex 8 VERTEX 18, 7, -40, 6, 4, 13, 7, 31 \ Vertex 9 VERTEX -18, 7, 13, 9, 0, 13, 11, 31 \ Vertex 10 VERTEX 18, 7, 13, 2, 0, 13, 4, 31 \ Vertex 11 VERTEX -18, -7, 13, 10, 1, 14, 12, 31 \ Vertex 12 VERTEX 18, -7, 13, 3, 1, 14, 5, 31 \ Vertex 13 VERTEX -11, 3, 29, 0, 0, 0, 0, 5 \ Vertex 14 VERTEX 11, 3, 29, 0, 0, 0, 0, 5 \ Vertex 15 VERTEX 11, 4, 24, 0, 0, 0, 0, 4 \ Vertex 16 VERTEX -11, 4, 24, 0, 0, 0, 0, 4 \ Vertex 17 .SHIP_ADDER_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 1, 1, 0, 31 \ Edge 0 EDGE 1, 2, 3, 2, 7 \ Edge 1 EDGE 2, 3, 5, 4, 31 \ Edge 2 EDGE 3, 4, 6, 5, 31 \ Edge 3 EDGE 4, 5, 14, 7, 31 \ Edge 4 EDGE 5, 6, 10, 8, 31 \ Edge 5 EDGE 6, 7, 10, 9, 31 \ Edge 6 EDGE 7, 0, 12, 11, 7 \ Edge 7 EDGE 3, 9, 6, 4, 31 \ Edge 8 EDGE 9, 8, 13, 7, 31 \ Edge 9 EDGE 8, 6, 9, 8, 31 \ Edge 10 EDGE 0, 10, 11, 0, 31 \ Edge 11 EDGE 7, 10, 11, 9, 31 \ Edge 12 EDGE 1, 11, 2, 0, 31 \ Edge 13 EDGE 2, 11, 4, 2, 31 \ Edge 14 EDGE 0, 12, 12, 1, 31 \ Edge 15 EDGE 7, 12, 12, 10, 31 \ Edge 16 EDGE 1, 13, 3, 1, 31 \ Edge 17 EDGE 2, 13, 5, 3, 31 \ Edge 18 EDGE 10, 11, 13, 0, 31 \ Edge 19 EDGE 12, 13, 14, 1, 31 \ Edge 20 EDGE 8, 10, 13, 9, 31 \ Edge 21 EDGE 9, 11, 13, 4, 31 \ Edge 22 EDGE 5, 12, 14, 10, 31 \ Edge 23 EDGE 4, 13, 14, 5, 31 \ Edge 24 EDGE 14, 15, 0, 0, 5 \ Edge 25 EDGE 15, 16, 0, 0, 3 \ Edge 26 EDGE 16, 17, 0, 0, 4 \ Edge 27 EDGE 17, 14, 0, 0, 3 \ Edge 28 .SHIP_ADDER_FACES \ normal_x, normal_y, normal_z, visibility FACE 0, 39, 10, 31 \ Face 0 FACE 0, -39, 10, 31 \ Face 1 FACE 69, 50, 13, 31 \ Face 2 FACE 69, -50, 13, 31 \ Face 3 FACE 30, 52, 0, 31 \ Face 4 FACE 30, -52, 0, 31 \ Face 5 FACE 0, 0, -160, 31 \ Face 6 FACE 0, 0, -160, 31 \ Face 7 FACE 0, 0, -160, 31 \ Face 8 FACE -30, 52, 0, 31 \ Face 9 FACE -30, -52, 0, 31 \ Face 10 FACE -69, 50, 13, 31 \ Face 11 FACE -69, -50, 13, 31 \ Face 12 FACE 0, 28, 0, 31 \ Face 13 FACE 0, -28, 0, 31 \ Face 14Name: SHIP_ADDER [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for an Adder Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_ADDER.SHIP_PLATE EQUB 0 + (8 << 4) \ Max. canisters on demise = 0 \ Market item when scooped = 8 + 1 = 9 (Alloys) EQUW 10 * 10 \ Targetable area = 10 * 10 EQUB LO(SHIP_PLATE_EDGES - SHIP_PLATE) \ Edges data offset (low) EQUB LO(SHIP_PLATE_FACES - SHIP_PLATE) \ Faces data offset (low) EQUB 17 \ Max. edge count = (17 - 1) / 4 = 4 EQUB 0 \ Gun vertex = 0 EQUB 10 \ Explosion count = 1, as (4 * n) + 6 = 10 EQUB 24 \ Number of vertices = 24 / 6 = 4 EQUB 4 \ Number of edges = 4 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUW 0 \ Bounty = 0 \ --- And replaced by: --------------------------------> EQUW 1 \ Bounty = 1 \ --- End of replacement ------------------------------> EQUB 4 \ Number of faces = 4 / 4 = 1 EQUB 5 \ Visibility distance = 5 \ --- Mod: Code removed for Elite-A: ------------------> \ EQUB 16 \ Max. energy = 16 \ --- And replaced by: --------------------------------> EQUB 8 \ Max. energy = 8 \ --- End of replacement ------------------------------> EQUB 16 \ Max. speed = 16 EQUB HI(SHIP_PLATE_EDGES - SHIP_PLATE) \ Edges data offset (high) EQUB HI(SHIP_PLATE_FACES - SHIP_PLATE) \ Faces data offset (high) EQUB 3 \ Normals are scaled by = 2^3 = 8 EQUB %00000000 \ Laser power = 0 \ Missiles = 0 .SHIP_PLATE_VERTICES \ x, y, z, face1, face2, face3, face4, visibility VERTEX -15, -22, -9, 15, 15, 15, 15, 31 \ Vertex 0 VERTEX -15, 38, -9, 15, 15, 15, 15, 31 \ Vertex 1 VERTEX 19, 32, 11, 15, 15, 15, 15, 20 \ Vertex 2 VERTEX 10, -46, 6, 15, 15, 15, 15, 20 \ Vertex 3 .SHIP_PLATE_EDGES \ vertex1, vertex2, face1, face2, visibility EDGE 0, 1, 15, 15, 31 \ Edge 0 EDGE 1, 2, 15, 15, 16 \ Edge 1 EDGE 2, 3, 15, 15, 20 \ Edge 2 EDGE 3, 0, 15, 15, 16 \ Edge 3 .SHIP_PLATE_FACES \ normal_x, normal_y, normal_z, visibility FACE 0, 0, 0, 0 \ Face 0 EQUB 6 \ This byte appears to be unusedName: SHIP_PLATE [Show more] Type: Variable Category: Drawing ships Summary: Ship blueprint for an alloy plate Deep dive: Ship blueprintsContext: See this variable on its own page References: This variable is used as follows: * XX21 uses SHIP_PLATEPRINT "S.S.V ", ~CODE%, " ", ~P%, " ", ~LOAD%, " ", ~LOAD% SAVE "3-assembled-output/S.V.bin", CODE%, CODE% + &0A00Save S.V.bin
[X]
Macro EDGE (category: Drawing ships)
Macro definition for adding edges to ship blueprints
[X]
Macro FACE (category: Drawing ships)
Macro definition for adding faces to ship blueprints
[X]
Variable SHIP_ADDER (category: Drawing ships)
Ship blueprint for an Adder
[X]
Label SHIP_ADDER_EDGES in variable SHIP_ADDER
[X]
Label SHIP_ADDER_FACES in variable SHIP_ADDER
[X]
Variable SHIP_BOA (category: Drawing ships)
Ship blueprint for a Boa
[X]
Label SHIP_BOA_EDGES in variable SHIP_BOA
[X]
Label SHIP_BOA_FACES in variable SHIP_BOA
[X]
Variable SHIP_BOULDER (category: Drawing ships)
Ship blueprint for a boulder
[X]
Label SHIP_BOULDER_EDGES in variable SHIP_BOULDER
[X]
Label SHIP_BOULDER_FACES in variable SHIP_BOULDER
[X]
Variable SHIP_CANISTER (category: Drawing ships)
Ship blueprint for a cargo canister
[X]
Label SHIP_CANISTER_EDGES in variable SHIP_CANISTER
[X]
Label SHIP_CANISTER_FACES in variable SHIP_CANISTER
[X]
Variable SHIP_COBRA_MK_1 (category: Drawing ships)
Ship blueprint for a Cobra Mk I
[X]
Label SHIP_COBRA_MK_1_EDGES in variable SHIP_COBRA_MK_1
[X]
Label SHIP_COBRA_MK_1_FACES in variable SHIP_COBRA_MK_1
[X]
Variable SHIP_COBRA_MK_3 (category: Drawing ships)
Ship blueprint for a Cobra Mk III
[X]
Label SHIP_COBRA_MK_3_EDGES in variable SHIP_COBRA_MK_3
[X]
Label SHIP_COBRA_MK_3_FACES in variable SHIP_COBRA_MK_3
[X]
Variable SHIP_DODO (category: Drawing ships)
Ship blueprint for a Dodecahedron ("Dodo") space station
[X]
Label SHIP_DODO_EDGES in variable SHIP_DODO
[X]
Label SHIP_DODO_FACES in variable SHIP_DODO
[X]
Variable SHIP_ESCAPE_POD (category: Drawing ships)
Ship blueprint for an escape pod
[X]
Label SHIP_ESCAPE_POD_EDGES in variable SHIP_ESCAPE_POD
[X]
Label SHIP_ESCAPE_POD_FACES in variable SHIP_ESCAPE_POD
[X]
Configuration variable SHIP_MISSILE
The address of the missile ship blueprint
[X]
Variable SHIP_PLATE (category: Drawing ships)
Ship blueprint for an alloy plate
[X]
Label SHIP_PLATE_EDGES in variable SHIP_PLATE
[X]
Label SHIP_PLATE_FACES in variable SHIP_PLATE
[X]
Variable SHIP_SIDEWINDER (category: Drawing ships)
Ship blueprint for a Sidewinder
[X]
Label SHIP_SIDEWINDER_EDGES in variable SHIP_SIDEWINDER
[X]
Label SHIP_SIDEWINDER_FACES in variable SHIP_SIDEWINDER
[X]
Variable SHIP_VIPER (category: Drawing ships)
Ship blueprint for a Viper
[X]
Label SHIP_VIPER_EDGES in variable SHIP_VIPER
[X]
Label SHIP_VIPER_FACES in variable SHIP_VIPER
[X]
Macro VERTEX (category: Drawing ships)
Macro definition for adding vertices to ship blueprints
[X]
[X]
[X]